Cooling Fan System

CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)


CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)
CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)
CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)
CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)

CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)    CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)

Please review the entire listing to understand exactly what you're purchasing. This listing is for a CNC autonomous cooling system featuring two industrial Sanyo Brushless High RPM Fans with A utonomous F an C ontroller module, and temperature probe.

The dimensions of the module is 5.5in long by 4in high to assure easy installation into virtually any system. The system is mounted in a tool less format utilizing thumb nuts for easy servicing/mounting. The fans, and board are also mounted in a tool less fashion with thumbnuts. The output both fans provide is 130CFM for maximum protection for your system. The video below covers an overview of the Autonomous Fan Controller board.

Autonomous CNC Fan Control System (Automatic Fan Controller With Alarm) - YouTube. Video will open in a new window. Here's a video of it in action in my 8 axes dual G540 motion controller. Worlds First Integrated Drive 8 Axes CNC Controller.

The fan controller used in this package is designed to be used with 12v, 24v, and 48v power supplies to eliminate the need for additional power supplies for your system, and offer the most cooling support options when comes to fan selection. This module requires the use of a 48v power supply as the fans it uses are 48v units. This unit will automatically control your systems fan speed based on your drives, or components (based on where you mount the temperature probe) operating temperature. The unit will cycle on the cooling fan at 86f, and continue accelerating the fan as more heat is generated. If the components temperature gets to 122f the fan will be operating at full speed.

The unit also has a built in switchable (on/off switch is on the diagram above) alarm that will sound if the temperature rises above 131f letting you know your very close to the drives/components maximum allowable operating temperature. The same result happens backwards as the temperature is low, or reduces on your monitored components. If the temperature begins to drop from the highest allowable temperature the unit supports the alarm will rest itself, and the unit will reduce fan speed until automatically till shutting off if the temperature continues to drop below the 86f threshold. If of course the temperature is maintained at any number between the highest, and the lowest temperatures the unit supports the fan's RPM is adjusted autonomously maintaining your controllers cooling, at reduced decibel levels.

The premade 12in temperature probe included with this system is rated to a maximum temperature of 230f, and is. The unit is waterproof, and has a hole in it for easy mounting to your components for temperature monitoring. The unit features status LED's.

The red LED indicates the unit is receiving power. The orange LED indicates when the fan becomes active. It will flicker the slower the fan's RPM is, and become more solid the faster the fan's RPM becomes. This package is completed with the required mounting hardware featuring thumbscrews for easy "tool less" mounting, and servicing.

The details for terminal connections of this cooling system is listed below. I also made a simple wiring diagram above, and included the units mounting dimensions. (Vin +): 48v DC power supply positive wiring terminal. (Vin-): 48 DC power supply negative wiring terminal.

(F1 +): The first channel positive DC fan positive wiring terminal. (F1-): The first channel negative DC fan terminal wiring terminal. The second channel positive DC fan positive wiring terminal.

The second channel negative DC fan terminal wiring terminal. P1, and P2 are not used on the terminal block as the unit comes with a prebuilt temperature sensor. The build lead time on the module is 3 days. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "len1007" and is located in this country: US.

This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia, South Korea, Indonesia, Taiwan, South Africa, Thailand, Israel, New Zealand, Philippines, Singapore, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Malaysia, Bangladesh, Brunei Darussalam, Egypt, Jordan, Cambodia, Sri Lanka, Macau, Maldives, Oman, Pakistan, Reunion, Vietnam.
  1. Number Of Axes: 1-8
  2. Custom Bundle: Yes
  3. MPN: Autonomous Cooling System
  4. Bundle Description: CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)
  5. Input Voltage: 48v
  6. Application: CNC Autonomous Cooling System
  7. Brand: Edealers Direct

CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)    CNC Autonomous Dual Sanyo Brushless Fan Controller Module (130CFM)